Pair of British Larch/Douglas Fir Swan Neck Closed Board Driveway Gates

These beautiful pair of Douglas Fir/English Larch Swan Neck Driveway Gates will provide an impressive entrance to any property.

Please note that the images with open bars are for material reference only and our Sawn Neck gates will be fully boarded.

Gate Width
Gate Height
Gate Range
£564.99
Quantity
Wishlist
Add to Compare

100% secure payments

These beautiful pair of Douglas Fir/English Larch Swan Neck Driveway Gates will provide an impressive entrance to any property.

English Larch/Douglas Fir are both definitively regarded as the most hard wearing of all domestic softwoods. The colour of English Larch/Douglas Fir varies from deep red to pink to cream and is completely random, it adds serious character to these most adaptable of English softwoods.

Supplied untreated, the high resin content of English Larch/Douglas Fir means that they require no treatment! However if you wish to prolong the supplied colour or use a weather resistant sealant, please take a look at our Treatex Douglas Fir Protection.

All gates come in and are priced as a pair with a left-handed and right-handed gates.

Our gates come in a range of height to best suit your entrance way. Our British Larch/Douglas Fir Swan Neck gates come in:

  • 1220mm at the highest point and 950mm at the lowest (to the top of the stiles)
  • 1525mm at the highest point and 1255mm at the lowest (to the top of the stiles)
  • 1830mm at the highest point and 1560mm at the lowest (to the top of the stiles)
  • 2135mm at the highest point and 1865mm at the lowest (to the top of the stiles)

We also supply the gates in the following widths:

  • 920mm (3ft) (A pair covers a span of 1840mm)
  • 1220mm (4ft) (A pair covers a span of 2440mm)
  • 1370mm (4.5ft) (A pair covers a span of 2740mm)
  • 1525mm (5ft) (A pair covers a span of 3050mm)
  • 1830mm (6ft) (A pair covers a span of 3660mm)
  • 2135mm (7ft) (A pair covers a span of 4270mm)
  • 2440mm (8ft) (A pair covers a span of 4880mm)

Prestige

Our Prestige range of gates are made using substantial 105mm x 75mm solid material and strengthened using 90 x 40mm bracing. Prestige gates are cladded with 22mm tongue and groove boards for a premium finish.

Priory

Our Priory range of gates are made using a lighter weight 90mm x 60mm solid material and strengthened using 90 x 40mm bracing. Priory gates are cladded with 16mm tongue and groove boards for a premium finish.

We supply a full range of fixings and gate posts.

Please note that the computer generated picture is for reference only and the actual product and dimensions may appear differently.

5000 Items

Specific References